Easy-to-clean non-slip tape is suitable for indoor wet areas.
Is extremely suitable for places where you walk around with socks or bare feet.
Can be used on stairs, in bathrooms, by pools etc.
We recommend the use of edge sealing in wetlands.
--
Easy-to-clean non-slip tape for wet areas.
Description:
Non-slip surface of embossed vinyl
Self-adhesive backing with removable backing liner. (paper is removed before sticking)
Pressure-activated acrylic glue with high adhesion.
Thickness of less than 1mm (without backliner)
Available in rolls and sheets.
Colours: Black, Transparent, Grey, White
Properties:
Easy to clean.
Clean with a soft cloth
Tear resistant.
Good slip resistance in class R10 according to DIN 51130.
Quick and easy to install.
Can be used on almost any properly prepared surface.
High wear resistance
Withstands moderate traffic with forklifts and the like.
Withstands use in the following temperatures -20 up to +60 °C
The substrate must be dry and clean during installation.
The tape must be walked on immediately after installation.
Suitable for:
Prevention of slip and fall accidents – with associated costs.
Increases safety on smooth, wet surfaces and surfaces covered with dirt and oil.
For indoor use.
For medium traffic, ideal for areas with low pollution.
Entrances, passages and paths.
Stairs, ramps and ramps
On machines and vehicles
Kitchens and canteens
Ideal for non-slip floor marking indoors.
Easy-to-clean non-slip tape can be used, among other things, in pools and bathing areas, which makes it particularly suitable for use in sports halls, swimming pools, etc.
If you want to prevent users of public areas from slipping and getting hurt, it is a good idea to use easy-to-clean tape at showers and edges where you can easily fall.
Prevent slip and fall accidents already today.
Non-slip tape in rolls from 19 to 1220mm
We have non-slip tape in rolls from 19 - 1220mm.
The rolls have a length of 18.3 metres.
The large sizes are not in stock, but they can usually be obtained within a short time.
The standard sizes in millimeters are:
19, 25, 50, 75, 100, 150, 305, 610, 914, 1220
In addition, the tape can also be obtained in special sizes.
Contact us to find out more about your options.
Non-slip tape in pre-cut sheets.
All our non-slip tape variants can be supplied in pre-cut sheets in 7 different standard sizes. If the desired variant is not on the page, contact us by email or telephone.
The 7 standard sizes are as follows: 25x800mm, 25x1000mm, 50x650mm, 50x800mm, 50x1000mm, 140x140mm, 150x610mm.
Non-slip tape cut according to your CAD drawing.
Do you have a special task that requires non-slip tape on special dimensions? We are ready to help you get your tape with exactly the measurements you need.
We can also help you prepare a CAD drawing.
Tape to special measurements can be produced from 1 pc.
Recommended products
- Ved at foretag et valg vil siden reloade
- Brug piletasterne samt mellemrumstasten for at befærde dig