Areas of application:
Especially suitable for particularly dirty and/or busy areas
For indoor and outdoor areas
Production areas and in Agriculture
Machinery and vehicles
PVC based netting for grain
Self-adhesive backing with removable film (release liner) as adhesive layer protection (for all m2 Anti-Slip Tape)
Pressure sensitive high performance acrylic adhesive
Low thickness of less than 2 mm (without release liner)
Available in rolls and pre-cut strips
Extra Strong - Coarse Non-Slip Tape for flat surfaces.
Particularly suitable for machines, garden tools etc.
Grain size: Grain 24
- Epoxy top coat
- Grains fixed in PVC netting which prevents the grains from falling off the tape.
- Self-adhesive backing with removable film (release liner)
- Pressure sensitive high performance acrylic adhesive
- Thickness of less than 2 mm (without release liner)
- Available in rolls and pre-cut strips
- Colour Black
Can be used indoors and outdoors on flat surfaces.
Can be used on virtually all flat surfaces.
We recommend the use of edge sealing in wetlands.
NOTE!: The glue on the tape is pressure-activated, it is recommended to install with a rubber roller so that the glue is activated and bubbles are avoided.
Non-slip tape in rolls from 19 to 1220mm
We have non-slip tape in rolls from 19 - 1220mm.
The rolls have a length of 18.3 metres.
The large sizes are not in stock, but they can usually be obtained within a short time.
The standard sizes in millimeters are:
19, 25, 50, 75, 100, 150, 305, 610, 914, 1220
In addition, the tape can also be obtained in special sizes.
Contact us to find out more about your options.
Non-slip tape in pre-cut sheets.
All our non-slip tape variants can be supplied in pre-cut sheets in 7 different standard sizes. If the desired variant is not on the page, contact us by email or telephone.
The 7 standard sizes are as follows: 25x800mm, 25x1000mm, 50x650mm, 50x800mm, 50x1000mm, 140x140mm, 150x610mm.
Non-slip tape cut according to your CAD drawing.
Do you have a special task that requires non-slip tape on special dimensions? We are ready to help you get your tape with exactly the measurements you need.
We can also help you prepare a CAD drawing.
Tape to special measurements can be produced from 1 pc.
- Ved at foretag et valg vil siden reloade
- Brug piletasterne samt mellemrumstasten for at befærde dig