Non-slip GRP Stair Edge Profile - 70x30mm - Fine (Grain 60)

Non-slip GRP Stair Edge Profile / Angle Profile can be used on stairs, landings and places where you want to make level differences visible and increase slip resistance.

The edge profiles are corrosion-resistant and can be used on all surfaces such as concrete, metal, wood etc.

Also suitable for simple and quick repair of broken edges on stairs etc. just screw a profile on top and the damage is hidden effectively.

This profile has the same grain size as our non-slip strips.

Description:

• Fiberglass profile made of fiberglass reinforced plastic
• Aluminum oxide Grit surface (embedded in the plastic)
• Grain sizes: Fine - Grain 60
• Thickness: approx. 3.2 mm
• Profile dimensions: 70mm deep x 30mm high (front edge)
• Standard lengths: 1000mm
• Colours: Black / Yellow

Properties:

• Outstanding slip prevention rated to R13 according to DIN 51130.
• Can be mounted with screws or glued.
• No special knowledge necessary.
• Usable on all solid surfaces.
• Robust and hard material with low weight.
• Extremely high wear resistance and durability (approx. 5 million crossings).
• UV resistant.
• Corrosion resistant.
• Non-conductive material.
• Fire retardant.
• Can be installed in all weather conditions.
• Wide applicable temperature range from -20 up to +120°C.
• Can be walked on immediately after installation (when gluing, however, the glue must harden first.)
• Easy adaptation, can be sawed and drilled as needed.

Applications:

• Ideal for the reconstruction of damaged concrete or wooden edges and steps.
• Prevention of slip, trip and fall accidents and the resulting costs.
• Can also be used on vehicles and the like.
• On smooth, cold, wet, damp, oiled or greasy surfaces.
• Indoor and underdoor areas.