Non-slip Tape Universal for use outdoors as well as indoors.
The tape is suitable for even surfaces.
Edge sealing is recommended for use in wet areas
Non-slip Tape in rolls and sheets is designed to increase the friction between the surface and walking traffic.
Using non-slip tape significantly prevents slipping and falling accidents.
Description:
- Grain 60
- High quality
- Durable
- Non-slip surface with grains of aluminum oxide.
- PVC net for fixing grain in the surface.
- Self-adhesive backing with removable backing liner. (paper is removed before sticking)
- Pressure-activated acrylic glue with high adhesion.
- Thickness of less than 1mm (without backliner)
- Available in rolls and sheets.
Colors: Black, Transparent, Blue, Green, Yellow, Grey, Red, Brown, White.
Properties:
High slip resistance in class R13 according to DIN 51130.
Quick and easy to install.
Can be used on almost any properly prepared surface.
Priming is recommended on concrete, cement, wood and porous surfaces.
High wear resistance (approx. 1 million passengers)
Withstands moderate traffic with forklifts and the like.
Tolerates most chemicals, as well as mineral oil.
UV stable.
Withstands use in the following temperatures -40 up to +80 °C
Installation temperature from +12 °C
The substrate must be dry and clean during installation.
The tape must be walked on immediately after installation.
Withstands load 6-8 hours after installation.
Maximum load is achieved after 72 hours. (Depending on temperature and humidity.)
Suitable for:
Prevention of slip and fall accidents - with associated costs.
Increases safety on smooth, wet surfaces and surfaces covered with dirt and oil.
For indoor and outdoor use.
For low, medium and heavy traffic.
Entrances, passages and paths.
Stairs, ramps and ramps
On machines and vehicles
Kitchens and canteens
Ideal for non-slip floor marking in workshops, productions, warehouses etc.
